In this article, you will find the steps to connect your W.W. Norton course materials to your Canvas course using the Follett Willo Digital Delivery 1.1 LTI Tool.

• Part One: Adding the Follett Willo Digital Delivery 1.1 Tool
• Part Two: Pairing the W.W. Norton Courseware

• Part Three: Adding W.W. Norton Product Links to Your Canvas Course

_______________________________________________________

Part One: Adding the Follett Willo Digital Delivery 1.1 Tool

Step 1.

Navigate to your course in Canvas. Click on Modules.

 

Step 2. 

Click the blue + Module button on the right-hand side.

 

Step 3. 

Name that module Course Resources or similar. Click the blue Add Module button on the bottom right.

 

Step 4.

In the newly created module, Click +.

Step 5. 

From the dropdown menu, select External Tool. Next, find and click on the Follett Willo Digital Delivery 1.1 link. If you do not see this option, your campus LMS Administrator may have named it something different such as Willo, Follett Willo, or something similar. Find one that is similar to one of the options. Then, click Add Item.

• Note: If you are unable to find the Follett Willo Digital Delivery 1.1 link or similar in your Canvas course, follow the directions below in Step 5a to add the Follett Willo Digital Delivery 1.1 link manually.

 

 

If you were able to locate the Follett Willo Digital Delivery 1.1 tool from this menu, skip to Step 6.

 

_______________________________________________________

Adding the Follett Willo Digital Delivery 1.1 Link Manually:

Step 5a. (If needed)

To add the Follett Willo Digital Delivery 1.1 tool manually, click + in module and select External Tool from the dropdown menu.

 

Next, fill in the Title box with Follett Willo Digital Delivery or something similar, and copy the following URL (that matches the country your school is located in) into the LTI URL box:

For USA: https://app.willolabs.com/onelink/

For Canada: https://ca.willolabs.com/onelink/  

 

Then click Add Item

 

 

Now click the Follett Willo Digital Delivery link you manually added to your Course Resources Module and proceed with the following steps.

_______________________________________________________

Part Two: Pairing the Courseware

Step 6

Click the Continue in a new window button.

 

Step 7

The Select Course to Pair screen should appear. If you teach more than one course, you may see multiple courses to choose from.

Find the correct course and click the Pair Course button.

Note: If you do not see a course listed, or if the course information is incorrect, please skip to the Missing Course Pairing section below.

Step 8

The Add Course Links screen will appear with a Course Paired Successfully message and you can now skip to Part Three: Adding Product/Publisher Link(s) to Your Course, Step 10.

 

Missing Course Pairing

Step 9

Note: This step is only necessary if your course materials do not auto-populate in Step 7. 

If you do not see your course materials in Step 7, follow these instructions to manually pair your course. 

 

Step 9a

Click the Missing Course link

 

Step 9b

A Missing Course sidebar will open. From here, search for your course by entering keywords such as ISBN, Course Name, or Instructor and clicking Search. Or, if you have a product token, you can enter it into the product token field and click Verify.

               

 

Step 9c

If you searched for your course, find your course and course material in the results, and click Confirm. Then confirm the information and click Initialize Pairing.

 

The Add Course Links screen will appear with a Course Paired Successfully message and you can now go to Part Three: Adding Product/Publisher Link(s) to Your Course, Step 10.

 

 

 

If you entered a product token for your course, verify the details of your course and course material, and click Confirm. Then select the term from the dropdown menu and click Continue. Then confirm the information and click Initialize Pairing.

 

 

 

The Add Course Links screen will appear with a Course Paired Successfully message and you can now skip to Part Three: Adding Product/Publisher Link(s) to Your Course, Step 10.

 

Part Three: Adding Product/Publisher Link(s) to Your Course

Step 10

You’re now ready to add links to your course. Start by adding the Instructor Self Service link, then click Push Links.

 

 

Step 11

You’ll receive a success message. Select Close Window and return to the LMS.

In the LMS, select Add Item to add your link to the course.

 

 

Next, verify that your course link was added.

 

Step 12

Once you have added the Instructor Self-Service link, click on it to take you back to the Course Management page, where you can select the Course Support and any additional Norton product links within your course:

Step 13

Then, select the options to Push directly to LMS

 

Step 14.

 

The product links have now been added to a new module titled Imported Course Resources. You can move these items to the original module you created or rename the module they are in.

 

Click one of the W.W. Norton links added.

 

 

Step 15. 

• You will now be prompted to log in to your W.W. Norton Publisher instructor account.
  • This should only happen the first time you log in and the next time you click a courseware link, you will be taken straight to the publisher's courseware site.
• Select Yes, I want to sign in.
• Enter your email address and password, then click Sign In
  • If you cannot remember your login, click Forgot your password?

 

 

Step 16.

Select Create a New Student set from scratch, then click Next.

 

 

• NOTE: For steps on copying an existing student set, please reach out to your Norton representative.

Step 17.

Fill in the course details on the next page, including course title, country (USA or Canada), school name, and course start and end dates. Then click Create Student Set when you're done.

 

 

Step 18.

You're all set! Your Norton course material and student set is now paired to your Canvas course! You will see a green "Connected to LMS" badge if everything is working as anticipated. 

 

 

 

 

_______________________________________________________

 

Assignment Creation and Grade Sync

 

• Navigate to the Assignments Tab on the left Navigation Bar and click +Assignment. 

 

• Fill in the Assignment Name, Assignment Points, Assignment Group, etc.

 

• Under Submission Type select External Tool from the drop down menu and click Find and select the Follett Willo Digital Delivery LTI 1.1 (or something similar), then click Select:

• Click Continue in a new window

• Select your Assignment link and click Return link(s) to LMS.
• Click Close window.  

• Back in Canvas, if prompted, click Select.

• Finish inserting your due dates and click Save or Save & Publish to make visible to students.

 

 

 

Note: Grades will automatically sync back to your Canvas Course and Gradebook as long as students are clicking on assignment links from their Canvas Course.

 

------------------------------------------

Additional Support:

If you have any questions or would like further assistance, submit a request or reach out to your W.W. Norton & Company Publisher Representative HERE.