In this article, you will find the steps to connect your adopted Course Resources to your Brightspace / D2L course using the Follett Willo Digital Delivery 1.3 LTI Tool.
Part One: Add the Follett Willo Digital Delivery 1.3 Tool
Step 1.
Navigate to your course in Brightspace/D2L, then click Content at the top left.
Step 2.
Click Add a Module and name it Course Resources (or a similar title). Then open that module.
Step 3.
Inside the module, click Existing Activities → Follett Willo Digital Delivery 1.3.
- If the tool isn’t listed, your LMS Admin may have renamed it Willo or Follett Willo.
- You can also find it under External Learning Tools.
Note: If the tool is not listed, see Add the Tool Manually below.
If you found the tool, skip to Step 4.
⚙️ Add the Tool Manually
Use this only if the tool does not appear under Existing Activities.
🔽 Click to expand manual setup steps
- Go to Existing Activities → External Learning Tools.
- Scroll to the bottom and click Create New LTI Link.
- Fill out the form:
- Title: Follett Willo Digital Delivery
-
LTI URL (choose region):
-
USA:
https://app2.willolabs.com/onelink/ -
Canada:
https://ca2.willolabs.com/onelink/
-
USA:
- (Optional) Check Open as External Resource to launch in a new tab.
- Click Create and Insert.
- Back in your module, click the new Follett Willo Digital Delivery link to continue pairing.
Important: If this link is for instructors only, set it to Hidden from users after setup.
Part Two: Pair the Courseware
Step 4.
Click Continue in a New Window.
Step 5.
On the Select Course to Pair screen, choose the correct course and click Pair Course.
Note: If your course is missing or shows incorrect details, see Missing Course Pairing below.
⚠️ Missing Course Pairing?
If your course didn’t appear on the pairing screen, follow these steps.
🔽 Click to expand manual pairing steps
- Click Missing Course or Pair My Course Manually.
-
Missing Course sidebar opens. Search for your course materials in one of two ways:
- Search Course or Material to Pair: Enter course code or instructor name, then click Search.
-
Add a Product Token: Enter a product token and click Verify.
Need a Product Token? Email facultysetup@follett.com.
- Click Confirm → Select Term → Click Continue → Click Initialize Pairing.
✅ When you see Course Paired Successfully, return to the main flow to continue.
Part Three: Adding Publisher/Product Links
Step 6.
Select Continue to Publisher on the right to proceed to Great River Learning.
Note: We’ll revisit this page later in the process to add the Follett Access Support link(s).
Step 7.
You will now be redirected to your Great River Learning instructor account.
If prompted, log in and choose the appropriate course section to pair by selecting Select next to the course name, then click Confirm.
Next, choose the gradebook you wish to associate with your LMS (as shown below).
Step 8.
Select content to deep link to and then click Submit.
Step 9.
The link(s) will now appear in your Brightspace/D2L Module area. Click the Great River Learning link added to initialize the course pairing.
- This step is necessary to ensure student access.
Step 10.
Adding the Follett Access Support and (optional) Instructor Self-Service links:
- In your course, Existing Activities and select the Follett Willo Digital Delivery 1.3 tool.
- From the Add Course Links screen, check the link(s), then click Add Links.
Note: The Follett Access Support link is visible to students and routes to the Follett Access Helpdesk for assistance.
Note: The (optional) Instructor Self-Service link is for instructors only and should be hidden from students.
Additional Support
If you need assistance or encounter issues during setup:
- Submit a support request to the Follett Implementation Team.
- Reach out to your Great River Learning for assistance.
- Refer to your publisher’s instructor resources or training center for additional documentation and best practices HERE.